Be sure to use a suitable material such as galvanized steel or aluminum and secure the lattice with heavy duty screws or nails. If you are using lattice to divide sections of your yard, you can also attach it directly to your home or to fence posts.Īs long as you have something to attach lattice to, you should be able to install it wherever you would like. Lattice is typically attached to deck posts and railings, as well as posts used to support taller shrubs or structures like arbors and trellises. When choosing between nails and screws, make sure to take into consideration the size and materials of the lattice that you are using in order to ensure you make the best choice for the job. Furthermore, if you are looking to reduce costs, nails may be a more cost effective solution. However, if you are working with softwoods, nails may be better suited since they are easier to work with. They are also less likely to come loose or work their way out over time. In most cases, screws are preferred because they provide a more secure connection than nails. It ultimately depends on the type of material that you are working with. Nails and screws can both be used for lattice applications. Should you use nails or screws for lattice? If you are building the lattice structure against a wall or an existing structure, then you don’t need a frame and you can attach the lattice panels directly to it. Make sure the header of the frame is strong enough to hold the lattice panels in place. However, if you are looking to create a more permanent structure, building a frame out of 2x4s or 2圆s and then attaching lattice panels to it can be a good idea. Instead, you can use lattice panels and U-channel strips to build the lattice structure on its own. No, lattice does not need a frame in order to be installed. With these steps, you can easily install a plastic lattice panel under your deck. This is best done by using exterior approved screws that penetrate the lattice and deck, but don’t go right through both. This will help to extend the life of the lattice and prevent it from fading or cracking over time from sun exposure.įinally, if you have children or pets, you should make sure that the plastic lattice is properly secured to the deck so it doesn’t become a hazard. To help keep the lattice looking fresh and like new, you will want to use a brush to apply a UV-resistant polyurethane oil finish to the lattice. Once the lattice is in place, you may consider using a compressible sealant in the corners of the lattice panel to ensure any lingering moisture is kept away from the sides of the lattice and deck. When drilling the lattice in place, use two screws per corner and try to use a drill bit that will only penetrate the lattice panel but not the deck below. You will then need to use a drill to put screws into the top of the lattice to secure it to the underneath of the deck. First, you will need to measure the area you want to cover with plastic lattice in order to purchase an appropriately sized panel or panels. Installing plastic lattice under a deck is a fairly straightforward process that requires some basic tools.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |